First Student Pre-Trip Inspection Practice Test

These questions are part of the practice quiz. Start practicing

• What is the minimum tread depth required on front wheels?
• What should be checked regarding the bus's tires during a pre-trip inspection?
• Which aspect of the exhaust system should be checked?
• What is the purpose of checking the bus's exhaust system?
• Which of the following is essential to check for the 8-way amber lights?
• When checking tire inflation, what is most important?
• What should be inspected regarding the bus's seats?
• Why is it important to confirm compliance with safety equipment?
• What should be verified regarding the fuel tank security?
• What should the alternator belt be like as part of the inspection?
• What is the acceptable condition for a 2-way antenna on the vehicle?
• What should be observed regarding hub oil?
• What should you check about the vehicle's steering?
• During inspection, what is not acceptable for brake fittings?
• What safety equipment should be checked during the pre-trip inspection?
• What should the odometer indicate during the pre-trip inspection?
• What should be true about the left and right turn signals?
• How should you inspect the emergency exit doors?
• What is the required condition of crossover mirrors during an inspection?
• How often should a pre-trip inspection be conducted?
• What aspect of the lights should be verified during the pre-trip inspection?
• In the event the parking brake does not pop out, what pressure indicates a potential problem?
• What is the condition that must be verified between the tires?
• What should be checked regarding the bus's lights?
• What condition must the windshield be in for safety?
• What can be impacted by improper tire pressure during a trip?
• During the differential plug inspection, what should be observed?
• What is required regarding the duals' seals?
• What is the significance of the license plate during pre-trip inspection?
• What is the required tread depth in major grooves for dual treads?
• Why is consistent documentation of pre-trip inspections important?
• What should the rear reflector be like?
• What is a critical characteristic of the cross member during inspection?
• Why is it essential to inspect the bus's coolant system?
• Why is it important to check the brake system before operating the bus?
• What should be done if you notice any fluid leaks during an inspection?
• How should you inspect the tires of the bus?
• During a pre-trip inspection, what should you check about the lights?
• What should you verify about the bus's mirrors?
• During the pre-trip inspection, what should be done with the bus doors?
• How can you ensure the bus battery is in good condition?
• Which item should be included in the pre-trip safety inventory check?
• Which component must be checked to ensure the bus can stop effectively?
• Which lights must be checked during a pre-trip inspection?
• What should you check regarding the bus's drive shaft?
• What should be checked about the bus's Safety Management System (SMS)?
• What should the tachometer read when the vehicle is at idle?
• What is the acceptable air pressure range during a pre-trip inspection?
• What is an important safety item to check in a bus intended for special needs?
• Which of the following is NOT one of the air brake tests performed during a pre-trip inspection?
• What is a key reason to confirm the fuel system integrity during a pre-trip inspection?
• What should be observed during the visual inspection of the bus's frame?
• What should the status of lugs and studs be?
• What should be verified regarding the bus's emergency exits?
• What is the proper position for a kick step during inspection?
• What is the benefit of ensuring all luggage compartments are secure?
• What safety item must be present and accessible inside the bus?
• What is the visibility requirement for the unlawful to pass sign?
• What does the kick step being "up" signify during the inspection?
• What is the first step in the First Student Pre-Trip Inspection?
• What is the key aspect of the air brake system to check?
• What must be verified about the ID markers on the vehicle?
• What is the function of the main bus battery?
• What does a functioning horn indicate during a series of inspections?
• What should be true about panel mirrors and their brackets?
• What action should be taken if any fluids are leaking during the inspection?
• What is the primary purpose of a pre-trip inspection for buses?
• What are the inspection requirements for a secure push rod?
• During inspection, what is the required condition for high beam lights?
• What inspection criteria apply to U-bolts and mountings?
• What items should be included in the bus's first aid kit?
• How important is it for U-bolts to be checked for secure fittings?
• What action should you take if you find a non-functioning safety feature during inspection?
• What should be noted about the condition of the air bags?
• What should drivers check concerning the bus driver's emergency kit?
• Why is it necessary to check the operational safety features?
• What is the normal range for water temperature in the vehicle during operation?
• What check should be conducted on auxiliary lights?
• What is the purpose of the mileage check of the odometer during pre-trip inspection?
• What should you look for regarding the bus's windshield during inspection?
• What is the appropriate transmission temperature range during a pre-trip inspection?
• How do you check the securement of wheelchair lifts during inspection?
• What is an important feature to inspect on tires during a pre-trip inspection?
• What must drivers ensure about the fuel tank during a pre-trip inspection?
• Why is it necessary to check the dashboard indicators?
• What condition should the license plate be in during an inspection?
• Why should the soundness of a bus's threshold be checked?
• What role does the throttle function check play in the pre-trip inspection?
• Why is inspecting the tire tread depth vital during a pre-trip inspection?
• What should be noted regarding the body of the school bus?
• What condition should the frame be in during a pre-trip inspection?
• What condition should the torque arm be in according to inspection standards?
• What is assessed when examining the bus's suspension system?
• What indicates correct spacing for dual tires during an inspection?
• Why is it essential to test the parking brake?
• What method ensures that the bus's signal lights are functioning?
• What should you ensure about the bus's emergency exit windows?
• What lights are primarily checked as part of the rear lights inspection?
• How do you assess the condition of the bus's battery cables?
• What is an important aspect of checking the bus's brakes?
• What is an important check to perform on windshield wipers?
• What should brake drums not have to pass inspection?
• How do you check the condition of the brake lights?
• During a pre-trip inspection, what should the oil pressure ideally measure?
• How often should a pre-trip inspection be performed?
• What should be inspected regarding the bus's undercarriage?
• What is a sign of a failed shock absorber during inspection?
• What should be checked regarding the radiator and coolant level?
• What is the importance of checking the fuel system during inspection?
• What should happen during the park brake hold test at 1200 rpm?
• How should you inspect the bus's axles?
• What condition should the fuel cap be in during inspection?
• During a pre-trip inspection, what aspect of the transmission should be checked?
• Why is it important to check fluid levels before starting a bus trip?
• For the air governor cut out test, the governor should cut out at what pressure range?
• What is checked with the brake lights during the inspection?
• When inspecting the roof hatches, what is vital to check?
• In which area should fluid levels be checked during the inspection?
• How does checking the windshield wipers contribute to safety?
• What is the minimum requirement for the window wash fluid during inspection?
• What is the minimum thickness required for brake linings?
• During the parking brake "pop" test, the parking brake should pop out at what pressure range?
• What must drivers check regarding passenger seating?
• What feature of the bus aids in night driving?
• When assessing brake linings, what should be ensured?
• What is important to verify regarding the vehicle's emergency kit?
• What must be checked for the rear emergency door during a pre-trip inspection?
• How do you check the tire pressure?
• How much of the tire should be covered by the mud flap?
• What is a critical characteristic of a water pump during inspection?
• How should tire inflation be checked?
• What condition should panel mirrors and brackets be in?
• What is the purpose of the first aid kit in a bus?
• What is the significance of checking the bus's readouts during the inspection?
• What should you check for regarding the battery during colder months?
• How can a driver assess the bus's overall condition?
• How should the bus's wipers be checked during the pre-trip inspection?
• What should be confirmed about the mirrors during the inspection?
• What is an important condition for the seat belt during the inspection?
• What should be confirmed about the steering mechanism?
• In what condition should the brake chamber be found?
• What should be done if the fuel level is at or below 1/2 tank?
• Which item should be inspected for leaks during a pre-trip check?
• Why is it essential to check the registration and insurance of a bus?
• How does assessing the condition of the coolant system benefit the pre-trip inspection?
• What should be the speedometer reading when the vehicle is not in motion during a pre-trip inspection?
• Why is it important to check the emergency exit doors?
• Why is it important to check the bus’s emergency equipment?
• Why is it important that the frame is straight during inspection?
• What is a crucial aspect of the brake air line and fittings?
• What is the recommended moisture level for brake air tanks?
• How should the bus's heater and air conditioning be tested?
• What is a key component to ensure passenger safety during a trip?
• What should be inspected regarding the emergency exits during a pre-trip inspection?
• What is the importance of the weight distribution check during a pre-trip inspection?
• Why should the driver's seat be adjusted during a pre-trip inspection?
• How should bushings be during the inspection?
• Why is it necessary to inspect the headlights during the pre-trip?
• What should be inspected regarding the bus’s frame?
• Why is visual inspection of the underside of the bus important?
• How many performance stops are required during a pre-trip inspection?
• What is the significance of monitoring warning lights during operation?
• Why is it essential to check the mirrors during a pre-trip inspection?
• How can you confirm that the fire extinguisher is functional?
• Which safety check involves reviewing the fuel system?
• What should you verify regarding the exhaust system?
• Why is it necessary to check warning lights on the dashboard?
• Why should fluid levels be checked as part of the pre-trip inspection?
• What is the role of proper signaling functionality in bus safety?
• What should be confirmed regarding the front lights of the bus during inspection?
• Which lights must be checked before operating the vehicle?
• Which statement is true regarding shock absorbers?
• What indicates that the alternator is nearly at 0 during inspection?
• What is the importance of checking the brakes during the pre-trip inspection?
• Why is a visual inspection of the bus's exterior important before travel?
• What do you check for in the bus's fluid levels during inspection?
• How does the check of the anemometer contribute to safety?
• What should the condition of front exterior lights on a school bus be?
• What is a sign that brake linings may be in poor condition?
• Which type of light is checked to ensure function for signaling intentions?
• During the air leak test, what position should the ignition be turned to?
• What should be ensured regarding the bus tires' alignment?
• What essential safety equipment must be checked for functionality during a pre-trip inspection?
• What must the WSP inspection sticker indicate?
• During the air leak test, how much psi should you not lose after holding the brake for one minute?
• Which condition should the drive shaft couplings meet during a pre-trip inspection?
• What is required for the spring hangers condition?
• What is a vital step in the pre-trip inspection for the bus's brakes?
• What indicates that lugs and studs are secure?
• How should the "School Bus" sign appear during the inspection?
• What condition disqualifies a brake chamber during inspection?
• What characteristics should the alternator itself exhibit?
• How long should the service brake be pumped during the low air warning test?
• What is the purpose of inspecting the first aid kit during a pre-trip inspection?
• Which aspect is important for steering arm and tie rod conditions?
• How do you ensure securements for items inside the vehicle?
• Which documentation must be reviewed during a pre-trip inspection?
• What is the requirement for side turn signals on a school bus?
• What is the requirement for the windshield's condition?
• When checking the tires, what are the two main aspects to look for?
• What should the driver do during the performance stop in the stall?
• What should be inspected to ensure the cleanliness of the bus interior?
• What should you check for in the engine compartment during the inspection?
• What is a proper condition for hoses and clamps during inspection?
• How should the cleanliness of the bus's interior be addressed?
• What is a critical aspect of checking the brakes during the inspection?
• What engine RPM is recommended for the air governor cut out test?
• What is the minimum tread depth for bus tires?
• What is a key reason for checking the lights during a pre-trip inspection?
• What are bus drivers required to check about their company-issued identification?
• What action should be taken regarding the bus's lights during inspection?
• What should be checked regarding the bus's heating and cooling systems?
• During the inspection of the engine, what should be checked for?
• Which fuel level should be maintained before leaving the yard?
• Which electrical components should be inspected?
• How should the bus headlights be assessed during inspection?
• What is required for the driver's seat during a pre-trip inspection?
• What should be checked regarding the bus's horn?
• What should you check about the bus's door locks?
• What is the acceptable voltage range indicating an alternator is charging?
• What is one of the primary reasons to check the brakes in a pre-trip inspection?
• What should be the condition of the air stem during inspection?
• What is the standard for exterior lights specific to orange and red colors?
• What does a clean windshield contribute to?
• How often should air filters be checked?
• What should be absent on the tire face to pass inspection?
• What is one important feature of the drive shaft during inspection?
• What is the maximum allowable movement of the push rod when the brakes are released?
• How should you verify the bus's load weight capacity?
• What does tread separation indicate?
• Which part of the bus should be examined for leaks?
• Why is checking the mirror condition essential during a pre-trip inspection?
• What condition should the rear lights be in?
• What should be done with loose objects inside the bus?
• What is the significance of checking the safety triangles?
• What is an acceptable condition for the rear lights of a vehicle during inspection?
• What is the goal of inspecting the fuel system for contaminants?
• Which condition describes the air bags during a pre-trip check?
• What should be inspected for signs of leaks during a pre-trip inspection?
• What is an important routine check for ensuring bus brake safety?
• What should be the status of joints in the steering arm inspection?
• How often should tire treads be visually inspected?
• Which of the following lights should be checked during the interior light check?
• During a pre-trip inspection, what is checked about the suspension system?
• What should be checked regarding the school's bus body?
• What should be noted about the vehicle documentation during a pre-trip inspection?
• At what pressure should the low air warning light and sound activate?
• What condition should the flange and rim be in?
• What is a requirement for the fuel tank during a pre-trip inspection?
• What should be true about the tailpipe during the inspection?
• What must leaf springs be during a pre-trip inspection?
• What condition should the mud flap be in?
• What is the requirement for crossover mirrors and crossing gates?
• What action is taken immediately after completing the performance stop test process?
• How should the bus's suspension be inspected?
• What action should be taken if a safety hazard is detected during inspection?
• How do you check the front axle for signs of damage?